[93] Seung-Wook Kim, Kibong Kang, Kichan Yoon, Dong-Hoon Choi, Design optimization of an angular contact ball bearing for the main shaft of a grinder, Mechanism and Machine Theory, Volume 104, October 2016, Pages 287-302. [LINK]

 

[92] Inyong Cho, Yongbin Lee, Dongheum Ryu, Dong-Hoon Choi, Comparison study of sampling methods for computer experiments using various performance measures, Structural and Multidisciplinary Optimization, 2016. [LINK]

 

[91] Dohyun Park, Seung-Hyun Jeong, Chang Won Kim, Heui Won Yang, Dae Seung Kim and Dong-Hoon Choi, Material arrangement optimization for weight minimization of an automotive body in white using a bi-level design strategy, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Volume 230, Issue 3, pp.395-405, 2016. [LINK]

 

[90] Seonho Park,Seung Hyun Jeong, Gil Ho Yoon, Albert A. Groenwold, Dong-Hoon Choi, A globally convergent sequential convex programming using an enhanced two-point diagonal quadratic approximation for structural optimization, Structural and Multidisciplinary Optimization, Volume 50, Issue5 pp.739-753, 2014. [LINK]

 

[89] Seonho Park,Seung Hyun Jeong, Gil Ho Yoon, Albert A. Groenwold, Dong-Hoon Choi, A globally convergent sequential convex programming using an enhanced two-point diagonal quadratic approximation for structural optimization, Structural and Multidisciplinary Optimization, 2014. [LINK]

 

[88] Yongbin Lee, Dong-Hoon Choi, Pointwise ensemble of meta-models using v nearest points cross-validation, Structural and Multidisciplinary Optimization, Volume 50, Issue3 pp.383-394, 2014.09. [LINK]

 

[87] Chang-Hyun Park · Jun-Hee Lee · Jae-Hyuk Jeong ·Dong-Hoon Choi, Design optimization of a laser printer cleaning blade for minimizing permanent set, Structural and Multidisciplinary Optimization, Volume 49, Issue1, pp.131-145, 2014.01. [LINK]

 

[86] Do-Hyoung Kim, Dong-Hoon Choi, Hak-Sung Kim, Design optimization of a carbon fiber reinforced composite automotive lower arm, Composites Part B, Volume 58, pp.400-407, 2014.01. [LINK]

 

[85] Seung Hyun Jeong, Gil Ho Yoon, Akihiro Takezawa, Dong-Hoon Choi, Development of a novel phase-field method for stress-based shape and topology optimization Computers and Structure, Computers & Structures, Volume 132, pp.84-98, 2013.12. [LINK]

 

[84] Seung Hyun Jeong, Seon Ho Park, Dong-Hoon Choi, Gil Ho Yoon, Toward a stress-based topology optimization procedure with indirect calculation of internal finite element information, Volume 66, No 6, pp.10651081, 2013.04. [LINK]

 

[83] Sangjin Jung ,Gyu-Byung Park, Dong-Hoon Choi, A Decomposition Method for Exploiting Parallel Computing Including the Determination of an Optimal Number of Subsystems, Journal of Mechanical Design(ASME), Volume 135, pp.041005-3~041005-9, 2013.04. [LINK]

 

[82] Yong-Dae Kim, Jae-Eun Jeong, Jin-Su Park, In-Hyung Yang, Tae-Sang Park,Pauziah Binti Muhamad, Dong-Hoon Choi, Jae-Eung Oh, Optimization of the lower arm of a vehicle suspension system for road noise reduction by sensitivity analysis, Mechanism and Machine Theory, Vol. 69, 278-302, 2013.07. [LINK]

 

[81] Weifei Hu, Dohyun Park and DongHoon Choi, Structural optimization procedure of a composite wind turbine blade for reducing both material cost and blade weight, Engineering Optimization, Vol. 45  No. 12, 1469-1487, 2013.01. [LINK]

 

[80] Gabseong Lee, Sunmin Yook, Kibong Kang, and Dong-Hoon Choi, Reliability-Based Design Optimization Using an Enhanced Dimension Reduction Method with Variable Sampling Points, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 9, pp. 1609-1618, 2012.09. [LINK]

 

[79] Sangjin Sung, Gunhee Jang, Kyungjin Kang, Jiyeon Kim, Dohyun Park, Donghun Choi, Development and optimal design of a HDD spindle motor with pulling magnet to reduce electrical loss, Microsystem Technologies, Volume 18, Issue 9-10, pp.1359-1364, 2012.09. [LINK]

 

[78] Seung-Hyun Jeong, Seon Ho Park, Dong-Hoon Choi, and Gil Ho Yoon, Topology optimization considering static failure theories for ductile and brittle materials, Computer & Structures, Volume 110-111, pp.116-132, 2012.08. [LINK]

 

[77] Seok-Ho Son, Sang-Bin Lee, Dong-Hoon Choi, Experiment-Based Design Optimization of a Washing Machine Liquid Balancer for Vibration Reduction, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 8, pp. 1433-1438, 2012.08. [LINK]

 

[76] Seung-Hyun Jeong, Dong-Hoon Choi, and Minjoong Jeong, Feasibility classification of new design points using support vector machine trained by reduced dataset, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 5, pp. 739-746, 2012.05. [LINK]

 

[75] Gabseong Lee, Jeongseok Park,Dong-Hoon Choi, Shape optimization of mobile phone folder module for structural strength, Journal of Mechanical Science and Technology, Vol. 26, No. 2, pp. 509-515, 2012.02. [LINK]

 

[74] Jae-Hyuk Choi. Sun-Ho Choi, Dohyun Park, Chang-Hyun Park, Byung-Ok Rhee and Dong-Hoon Choi, Design optimization of an injection mold for minimizing temperature deviation, International Journal of Automotive Technology, Vol. 13, No. 2, pp. 273-277, 2012.02. [LINK]

 

[73] Weifei Hu, Insik Han, Sang-Chul Park, Dong-Hoon Choi, Multi-objective structural optimization of a hawt composite blade based on ultimate limit state analysis, Journal of Mechanical Science and Technology, Vol. 26, No. 1, pp.129-135, 2012.01. [LINK]

 

[72] Chang-Hyun Park, Hee-Jin Shim, Dong-Hoon Choi, Jung-Kyu Kim and Sang-Min Lee, Shape Optimization of Rubber Isolators in Automotive Cooling Modules for the Maximization of Vibration Isolation and Fatigue Life, International Journal of Automotive Technology, Vol. 13, No. 1, pp. 61-75, 2012.01. [LINK]

 

[71] Sangjin Jung, Dong-Hoon Choi, Byung-Lyul Choi and Ju Ho Kim, Tolerance optimization of a mobile phone camera lens system, Applied Optics, Vol. 50, Issue 23, pp. 4688-4700, 2011.08. [LINK]

 

[70] Zhimin Fan, Weifei Hu, Dong-Hoon Choi and Jun Xu, Study on the Parametric Optimal Design of a Different-Speed Mixer, Advanced Materials Research, Vol. 221, pp. 104-110, 2011.05. [LINK]

 

[69] Yong-Kyun Lee, Dong-Hoon Choi and Kyung-Joon Cha, Choosing a suitable sample size in descriptive sampling, Journal of Mechanical Science and Technology, Vol. 24,  No. 6, pp. 1211~1218, 2010.06 .[LINK]

 

[68] Hyung-il Choi, Yongbin Lee, Dong-Hoon Choi, Joo-Sung Maeng, Design optimization of a viscous micropump with two rotating cylinders for maximizing efficiency, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (Springer), Vol. 40, Issue 1, pp. 537-548. 2010.01. [LINK]

 

[67] Sang-Joon Yoon, Seok-Ho Son, Jihoon Kang, Hyunki Kim, JingyooYoo and Dong-Hoon Choi, Simulation of a Head Slider Considering Discrete Track Recording Technology, Journal of Mechanical Science and Technology, Vol. 23, No. 10, pp. 2679~2685, 2009.10.[LINK]

 

[66] Dong-Hoon Choi, Yongbin Lee, Byeongsoo Kim, Construction of the Radial Basis Function based on a Sequential Sampling Approach using a Cross-Validation, Journal of Mechanical Science and Technology, Vol. 23, No.12 , pp. 3357-3365, 2009.12.[LINK]

 

[65] Sang-Joon Yoon, Seok-Ho  Son, Jihoon Kang, Hyunki Kim, Jingyoo Yoo, and Dong-Hoon Choi, Optimal Design of Slider Air-Bearing for Discrete Track Recording Technology, IEEE TRANSACTIONS ON MAGENTICS, Vol. 45, Issue 5, pp. 2296-2299. 2009.05. [LINK]

 

[64] Gabseong Lee, Jae Ho Jeong, Sang-Joon Yoon, and Dong-Hoon Choi, Design Optimization for Optical Pattern in Light Guide Panel to Improve Illuminance and Uniformity of the Liquid Crystal Display, Optical Engineering, Vol. 48, Issues 2, Article Number: 024001. 2009.02. [LINK]

 

[63] Byeong-Soo Kim, Yong-Bin Lee and Dong-Hoon Choi, Comparison study on the accuracy of metamodeling technique for non-convex functions, Journal of Mechanical Science and Technology, Vol. 23, No. 4, pp. 1175-1181, 2009. 04.[LINK]

 

[62] B.-L.CHOI, D.-H.CHOI, J. MIN, K JEON(KATI), J. PARK(KATI), S. CHOI(KATI) and J. -M. KO(Austem), TORSION BEAM AXLE SYSTEM DESIGN WITH A MULTIDISCIPLINARY APPROACH, International Journal of Automotive Technology, Vol. 10, Issues 1, pp. 49-54, 2009.02.[LINK]

 

[61] Dong-Ho Kim, Gabseong Lee, Dong-Hoon Choi, Jin-Ho Choi, Sang Hoon Lee, Byung Man Kwak, Reliability Analysis Using an Enhanced Response Surface Moment Method, Journal of Mechanical Science and Technology, Vol. 22,  No. 6, pp. 1052~1057, 2008.06.[LINK]

 

[60] Yongbin Lee, Snagup Oh and Dong-Hoon Choi, Design Optimization Using Support Vector Regression, Journal of Mechanical Science and Technology, Vol. 22,  No. 2, pp. 213~220, 2008.2.[LINK]

 

[59] Jong-Rip Kim, Dong-Hoon Choi, Enhanced two-point diagonal quadratic approximation methods for design optimization, Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 6-8, pp. 846-856. 2008.1.15. [LINK]

 

[58] Sang-Joon Yoon, Seok-Ho Son, and Dong-Hoon Choi, Head Slider Designs Considering Dynamic L/UL Systems for 1-in Disk Drives, IEEE TRANSACTIONS ON MAGENTICS, Vol. 44, Issues 1, pp. 151-156. 2008.01. [LINK]

 

[57] Oh Kyoungcheol, Min Junhong, Choi Donghoon, Kim Hyunsoo, Optimization of Control Strategy for a Single-Shaft Parallel Hybrid Electric Vehicle, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-Journal of Automobile Engineering, Vol. 221, Issues 5, pp. 555-565. 2007.05 [LINK]

 

[56] Jongsoo Lee, Heeseok Jeong, Dong-Hoon Choi, Vitali Volovoi, Dimitri Mavirs, An Enhancement of Constraint Feasibility in BPN Based Approximate Optimization, Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issues 17-20, pp. 2147-2160. 2007.05.15. [LINK]

 

[55] S.-J. Yoon, J. Lee, Y.-P. Park and D.-H. Choi, Design of Optical Flying Head for Magneto Optical Recording, IEEE TRANSACTIONS ON MAGENTICS, Vol. 41, No.10,  pp.2851-2853. 2005.10. [LINK]

 

[54] Byung-Lyul Choi, Jin-Ho Choi, Dong-Hoon Choi, Reliability-Based Design Optimization of an Automotive Suspension System for Enhancing Kinematic and Compliance Characteristics, International Journal of Automotive Technology, 6권 제3 pp.235-242, 2005. 6.[LINK]

 

[53] Sookyung Kim, Sang-Joon Yoon, Dong-Hoon Choi and Seung-Yop Lee, A Study on the Flying Stability of Optical Flying Head on the Plastic Disks, IEEE TRANSACTIONS ON MAGENTICS, Vol.41, No.2, pp. 986-988. 2005.2. [LINK]

 

[52] Sang-Joon Yoon, Dong-Hoon Choi, Probabilistic Designs of Air Bearing Surface on Manufacturing Tolerances, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.127, No.1, pp.149-154. 2005.1. [LINK]

 

[51] D.- I. Kim, G.K. Zhavnerko, H.-S. Ahn and D.-H. Choi, Tribological properties of Langmuir-Blodgett films on silicon surface in microscale sliding contact, Tribology Letters, Vol. 17. No. 2, pp.169-177. 2004.8.2. [LINK]

 

[50] Doo-In Kim and Hyo-Sok Ahn , Dong Hoon Choi, Effect of surface hydrophilicuty and water vapor pressure on the interfacial shear strength of adsorbed water layer, APPLIED PHYSICS LETTERS, Vol. 84. No. 11 pp.1919-1921. 2004.5.15. [LINK]

 

[49] Kyoungwoo Park, Dong-Hoon Choi, Kwan-Soo Lee, NUMERICAL SHAPE OPTIMIZATION FOR HIGH PERFORMANCE OF A HEAT SINK WITH PIN-FINS, Vol. 46 No.7, pp.909-927. 2004.11. [LINK]

 

[48] Kyoungwoo Park, Dong-Hoon Choi, Shape Optimization of a Plate-Fin Type Heat Sink with Triangular-Shaped Vortex Generator, KSME International Journal, Vol. 18,  No.9, pp.1590~1603, 2004. 9.[LINK]

 

[47] Sang-Joon Yoon, Dong-Hoon Choi, Reliability-Based Design Optimization of Slider Air Bearings, KSME International Journal, Vol. 18,  No. 10, pp. 1722~1729, 2004. 10.[LINK]

 

[46] Sang-Joon Yoon, Dong-Hoon Choi, Head Slider Designs Using Approximation Methods, KSME International Journal, Vol. 18,  No. 1, pp. 37~44, 2004. 1.[LINK]

 

[45] Hyung-Wook Park, Se J. Lee, Hyun-Seop Lee, Dong-Hoon Choi, Adaptive Parallel Decomposition for Multidisciplinary Design, KSME International Journal, Vol. 18, No. 5, pp. 814~819, 2004. 5.[LINK]

 

[44] Lee YB, Kim TH, Kim CH, Lee NS, Choi DH, Unbalance response of a super-critical rotor supported by foil bearings-comparison with test results, Tribology Transactions, Vol.47, No.1, pp.54-60. 2004.5. [LINK]

 

[43] Lee YB, Kim TH, Kim CH, Lee NS, Choi DH, Dynamic characteristics of a flexible rotor system supported by a viscoelastic foil bearing (VEFB), Tribology International, Vol.37, No.9, pp.679-687. 2004.9. [LINK]

 

[42] Sang-Joon Yoon, Dong-Hoon Choi, Topology Designs of Slider Air Bearings, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.126, No.2, pp.342-346. 2004.4. [LINK]

 

[41] Kyoungwoo Park, Dong-Hoon Choi, and Kwan-Soo Lee, OPTIMUM DESIGN OF PLATE HEAT EXCHANGER WITH STAGGERED PIN ARRAYS, Numerical Heat Transfer,Part A, Part A, 45 , 347-361. 2004.3. [LINK]

 

[40] Sang-Joon Yoon and Dong-Hoon Choi, Air-Bearing Design Based on Global Approximation Concepts, IEEE TRANSACTIONS ON Magnetics, Vol. 39, No.5, pp.2468~2470. 2003.9. [LINK]

 

[39] An Sung Lee, Jin Woong Ha, Dong-Hoon Choi, Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system, Journal of sound and vibration, Vol.263, No.4, pp. 725~742. 2003.6.12. [LINK]

 

[38] Sang-Joon Yoon, Dong-Hoon Choi, Adjoint Design Sensitivity Analysis of Molecular Gas Film Lubrication Sliders, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.125, No.1, pp.145~151. 2003.1. [LINK]

 

[37] Sang-Joon Yoon, Dong-In Kim, Tae-Gun Jeong, Dong-Hoon Choi, Member, IEEE, Optimizations of Air-Lubricated Slider Bearings by Using Reduced Basis Concept, IEEE TRANSACTIONS ON MAGNETICS, Vol.38, No.5, pp. 1274~2176. 2002.9. [LINK]

 

[36] Sang-Joon Yoon, Min-Soo Kim, Dong-Hoon Choi, Design Sensitivity Analysis of Air-Lubricated Slider Bearings, IEEE TRANSACTIONS ON MAGNETICS, Vol.38, No.5, pp.2171-2173. 2002.9. [LINK]

 

[35] Youn-Hyun Kim, Jae-Hak Choi, Sung-In Jung, Yon-Do Chun and Sol Kim, Ju Lee, Min-Sik Chu, Kyung-Jin Hong, Dong-Hoon Choi, Optimal design of switched reluctance motor using two-dimensional finite element method, JOURNAL OF APPLIED PHYSICS, Vol. 91, No.10, pp. 6967-6969. 2002.5.15. [LINK]

 

[34] Sang-Joon Yoon, Min-Soo Kim, Dong-Hoon Choi, Topological Design Sensitivity on the Air Bearing Surface of Head Slider, KSME International Journal, Vol. 16 No. 8, pp. 1102~1108, 2002. 5.[LINK]

 

[33] Je-SeonRyu, Min-Soo Kim, Kyung-Joon Cha, Tae-Hee Lee, Dong-Hoon Choi, Kriging Interpolation Methods InGeostatistics and DACE Model, KSME International Journal, Vol. 16, No. 5, pp. 619~632, 2002. 2.[LINK]

 

[32] Hyung-Wook Park, Min-Soo Kim, Dong-Hoon Choi, A New Decomposition Method for Parallel Processing Multi-Level Optimization, KSME International Journal, Vol. 16, No. 5, pp. 609~618, 2002. 5.[LINK]

 

[31] N.S.Lee, D.H.Choi, Y.B.Lee, T.H.Kim, C.H.Kim, The Influence of the Slip Flow on Steady-State Load Capacity, Stiffness and Damping Coefficients of Elastically Supported Gas Foil Bearings, Tribology Transactions, pp. 478~484. 2002.4. [LINK]

 

[30] Mis-Soo Kim, Kyung-jin Hong, Dong-Hoon Choi, Augmented D-Optimal Design for Effective Response Surface Modeling and Optimization, KSME International Journal, Vol. 16 No. 2, pp.203~210, 2002. 2.[LINK]

 

[29] M.-S. Kim, D.-H. Choi, Y. Hwang, Composite Nonsmooth Optimization Using Approximate Generalized Gradient Vectors, Journal of Optimization Theory and Applications, 112(1), pp.145-165. 2002.1. [LINK]

 

[28] Min-Soo Kim, Jong-Rip Kim, Jae-Young Jeon, Dong-Hoon Choi, Efficient Mechanical System Optimization Using Two-Point Diagonal Quadratic Approximation in the Nonlinear Intervening Variable Space, KSME International Journal, Vol.15, No.9, pp.1257-1267. 2001.9. [LINK]

 

[27] Youn-Hyun Kim, Sol Kim, Kab-Jae Lee, Ju Lee, Dong-Hoon Choi, A New Torque Estimating Method of Switched Reluctance Motor, Journal of Small & Medium Electric Machines, 28(5) pp.5-10. 2001.

 

[26] Min-Soo Kim, Jong-Rip Kim, Jae-Young Jeon, Dong-Hoon Choi, Efficient Mechanical System Optimization Using Two-Point Diagonal Quadratic Approximation in the Nonlinear Intervening Variable Space, KSME International Journal, Vol. 15, No. 9, pp. 1257~1265, 2001. 9.[LINK]

 

[25] Min-Soo Kim, Dong-Hoon Choi, An Efficient Dynamic Response Optimization Using the Design sensitivities Approximated Within the Estimate Confidence Radius, KSME International Journal, Vol. 15, No. 8, pp. 1143~1155, 2001. 8.[LINK]

 

[24] Kyung-Jin Hong, Min-Soo Kim, Dong-Hoon Choi, Efficient Approximation Method for Construction Quadratic Response Surface Model, KSME International Journal, Vol. 15, No. 7, pp. 876~888, 2001. 7.[LINK]

 

[23] Tae-Sik Kang, Dong-Hoon Choi, Tae-Gun Jeong, Optimal Design of HDD Air-Lubricated Slider Bearings for Improving  Dynamic Characteristics and Operating Performance, Journal of Tribology, Vol. 123, pp.541-547. 2001.7. [LINK]

 

[22] Min-Soo Kim, Dong-Hoon Choi, Direct treatment of a max-value cost function in parametric optimization, International Journal for Numerical Methods in Engineering, Vol.50, Issue. 1, pp.169-180. 2001.1 [LINK]

 

[21] Ki-Chan Yoon and Dong-Hoon Choi, A Design Method of an Automotive Wheel-Bearing Unit with Discrete  Design Variables Using Genetic Algorithms, Journal of Tribology, Vol. 123, No. 1, pp.181-187. 2001.1.[LINK]

 

[20] Min-Soo Kim, Dong-Hoon Choi, A New Penalty Parameter Update Rule in the Augmented Lagrange Multiplier Method for Dynamic Response Optimization, KSME International Journal, Vol. 14, No. 10, pp. 1122~1130, 2000. 10.[LINK]

 

[19] N-S LEE and D-H CHOI, K-Y SEOK, Y-B LEE, and C-H KIM, Vibration control of a flexible rotor with a slottedring sealed electro-rheological squeeze film damper, C576/059/2000, pp.499-507. 2000.

 

[18] Dong-Soo Lee, Dong-Hoon Choi, Reduced Weight Design of A Flexible Rotor with Ball Bearing Stiffness  Characteristics Varying with Rotational Speed and Load, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, Vol. 122, Issue. 3,  pp.203-208. 2000.7. [LINK]

 

[17] Dong-Hoon Choi, Tae-Sik, Kang, Tae-Gun, Jeong, An Optimum Design of the Sub-ambient Pressure Shaped Rail Sliders on Flying Characteristics Considering the High Altitude Condition, IEEE Transactions on Magnetics, Vol. 35, No. 5, pp. 2424~2428. 1999.9. [LINK]

 

[16] Dong-Hoon Choi, Tae-Sik, Kang, An Optimization Method for Design of Subambient Pressure Shaped Rail Sliders, Journal of Tribology-Transactions of the ASME, Vol. 121, No. 3, pp. 575-580. 1999.7. [LINK]

 

[15] Jin-Ho Choi, Se-Jung Lee, Dong-Hoon Choi, Tolerance Optimization for Mechanisms with Lubricated Joints, Multibody System Dynamics, Vol. 2, No. 2, pp. 145-168. 1998.6. [LINK]

 

[14] Jin-Ho Choi, Se-Jung Lee, Dong-Hoon Choi, Stochastic Linkage Modeling for Mechanical Error Analysis of Planar Mechanisms, Mechanics Of Structures And Machines, Vol. 26, No. 3, pp. 257~276. 1998. [LINK]

 

[13] Min-Soo Kim, Dong-Hoon Choi, Min-Max Dynamic Response Optimization of Mechanical Systems Using Approximate Augmented Lagrangian, International Journal For Numerical Methods In Engineering, Vol. 43, No. 3, pp. 549-564. 1998.10[LINK]

 

[12] Sang-Joon Yoon, Dong-Hoon Choi, An Optimum Design of the Transverse Pressure Contour Slider for Enhanced Flying Characteristics, Journal of Tribology-Transactions of the ASME, Vol. 119, No. 3, pp. 520-524. 1997.7. [LINK]

 

[11] Min-Soo Kim, Dong-Hoon Choi, Multibody Dynamic Response Optimization with ALM and Approximate Line Search, Multibody System Dynamics, Kluwer Academic Publishers, Vol. 1, No. 1, pp. 47-64. 1997[LINK]

 

[10] Dong-Soo Lee, Dong-Hoon Choi, A Dynamic Analysis of a Flexible Rotor in Ball Bearings with Nonlinear Stiffness Characteristics, International Journal of Rotating Machinery, Overseas Publishers Association, Vol. 3, No. 2, pp. 73-80. 1997.[LINK]

 

[9] Dong-Hoon Choi and Min-Soo Kim, A New Approach to the Min-Max Dynamic Response Optimization, IUTAM Symposium on Optimzation of Mechanial Systems, pp. 65-72. 1996. [LINK]

 

[8] Sang-Joon Yoon, Dong-Hoon Choi, Design Optimization of the Taper-Flat Slider Positioned by a Rotary Actuator, Journal of Tribology-Transactions of the ASME, Vol. 117, No. 4, pp. 588-593. 1995. 10. [LINK]

 

[7] Nak Young Chong, Dong-Hoon Choi, Il Hong Suh, A Motion Plannin Strategy for Multifingered Hands Considering Sliding and Rolling Contacts, Robotica, Cambridge University Press, Vol. 13, No. 2, pp. 149~158. 1995.  [LINK]

 

[6] Dong-Hoon Choi, Sang-Joon Yoon, Static Analysis of Flying Characteristics of the Head Slider by Using an Optimization Technique, Journal of Tribology-Transactions of the ASME, Vol. 116, Issue. 1, pp. 90-94. 1994. 1. [LINK]

 

[5] Nak Young Chong, Dong-Hoon Choi, Il Hong Suh, A QuasistaticManipulati on for Multifingered Robotic Hands, KSME Journal, Vol. 7, No. 3, pp. 231~241, 1993. 9.[LINK]

 

[4] K. Komvopoulos, Dong-Hoon Choi, Elastic Finite Element Analysis of Multi-Asperity Contacts, Journal of Tribology-Transactions of the ASME, Vol. 114, Issue. 4, pp. 823-831. 1992. 10. [LINK]

 

[3] Nak Young Chong, Il Hong Suh, Dong-Hoon Choi, Collision-Free Trajectory Planning for Dual Robot Arms, Journal of KIEE, Vol. 2, No. 2, pp. 144~149, 1989. 9.[LINK]

 

[2] Dong-Hoon Choi,An Algorithmic Solution for Frictional Contact Problems Subjected to a Twisting Moment, KSME Journal, Vol. 1, No. 2, pp. 108~114, 1987. 11.[LINK]

 

[1] Dong-Hoon Choi, A.Seireg, An Algorithmic Solution for Frictional Contact Problems Subjected to a Twisting Moment, KSME Journal, Vol 1, No 2, pp. 108~114, 1987. 2.[LINK]